澳大利亚“基于能力本位的评估”模式及对我国高职教育 质量评估的启 示

澳大利亚职业教育在全球享有较高的声誉,这与其坚持严格的"基于能力本位的评估"(competency based assessment, CBA)密不可分。介绍了澳大利亚CBA的内涵特征,并详细描述"准备评估、开发评估工具、开展评估、对评估结果进行评估"的CBA运作过程,关注评估工具的开发和后续常规系统性检查及完善,以期对我国的高等职业教育质量评估起到启示和借鉴作用。     

Adaptive constraint control for flexible manipulator systems modeled by partial differential equations with dead-zone input

In this article, based on partial differential equations (PDEs), the flexible manipulator system with both dead-zone input and state constraints is studied. The dynamic model of the flexible manipulator system is described by PDEs. The parameters of the dead-zone input are unknown, and the state constraint problem is also considered. An adaptive approach is proposed to offset the effects caused by dead-zone input. Thus, to guarantee that all states remain within their respective constraint regions, the boundary control law based on the barrier Lyapunov function is given, and an adaptive controller is designed. According to the Lyapunov analysis method, the control method is given to ensure that all signals of the closed-loop system are bounded and all states satisfy the constraint conditions. Finally, simulation results show the effectiveness of the proposed control method in this article.     

深圳抽水蓄能电站引水系统灌浆质量控制与分析

抽水蓄能电站引水系统灌浆质量控制,决定了水道系统渗水量的大小,关系到电站长期运行的经济指标及水道安全。详细介绍了深圳抽水蓄能电站灌浆参数的设计和灌浆中采取的管理措施与技术措施,分析了灌浆检测成果。电站投入运行以来,引水系统结构稳定,无渗漏。通过总结深圳抽水蓄能电站灌浆过程,对水道引水系统灌浆质量控制提出了几点建议,可供类似工程借鉴。     

接触器触头系统振动机理分析及算法优化

为了解决合闸过程中动、静触头接触引起的振动弹跳问题.本文建立了接触系统的二自由度运动微分方程,并利用遗传算法对交流接触器吸合过程进行优化,同时通过高速摄影实验对接触弹跳的全过程进行了观察和分析.结果表明:理论与实验结果高度一致,铁心在触头分离前发生碰撞,进一步加剧触头弹跳;铁芯弹跳再次碰撞时,触头的弹跳不受影响;在接触器运行过程中,动铁芯的运动会引起系统轻微振动;采用遗传算法优化的接触器触头弹跳时间和最大振幅均减小.研究结果为进一步控制和减小接触弹跳提供了理论依据.     

A fuzzy logic PI control with feedforward compensation for hydrogen pressure in vehicular fuel cell system

In a vehicular fuel cell system, alternative load and frequent purge action can lead to anode pressure varies with the hydrogen mass flow fluctuation. It's crucial to control the pressure difference between anode and cathode within a reasonable range to avoid adverse phenomena such as membrane failure, reactant starvation, or even water management fault. In this paper, an improved proportional integrative (PI) controller by the fuzzy logic technique that considers the engineer experience and knowledge on the hydrogen supply system behavior is proposed for hydrogen pressure control, in which the PI parameters are tuned by a fuzzy decision process. Furthermore, load current and purge action regarded as input disturbances are applied for feedforward compensation to reduce the pressure response hysteresis. A hydrogen supply subsystem based on the proportional valve is modeled, and corresponding parameters are determined by analyzing the response time and steady pressure fluctuation. The performance of the conventional PI controller, the fuzzy logic PI (FLPI) controller and fuzzy logic PI with feedforward (FLPIF) controller is validated. The presented results indicated that the FLPI controller significantly improves the dynamic response of hydrogen pressure compared to the PI controller, and the FLPIF controller can further reduce overshoot caused by disturbance. Finally, the proposed FLPIF controller is implemented on a rapid prototype platform of the hydrogen supply subsystem and an actual fuel cell system, exhibiting satisfactory performance.     

Development of autonomous monitoring and performance evaluation system of grid-tied photovoltaic station

This work aims to improve the existing monitoring systems MS for two grid-connected PV stations GCPVS of URERMS ADRAR, to eliminate its limitations. This improvement consists of developing an MS which is used for two PV stations with different configurations. This MS contains new LabVIEW-based monitoring software for visualizing real-time measured data and evaluating GCPVS performance. In addition, it illustrates the 2D and 3D real-time relationships of PV system parameters, which allow us to understand the dynamic behavior of PV system components. This developed monitoring software synchronizes also the various data acquisition units DAU of GCPVS, allowing simultaneous data access.To perform a reliable performance analysis and a comparative study of different GCPVS based on accurate measurements, the sensor's calibration is performed with its DAU. The MS autonomy is ensured by integrating developed PV-UPS. A graphical user interface is provided for the evaluation of PV-UPS performance.     

Thermal analysis and management of proton exchange membrane fuel cell stacks for automotive vehicle

The thermal management of a proton exchange membrane fuel cell (PEMFC) is crucial for fuel cell vehicles. This paper presents a new simulation model for the water-cooled PEMFC stacks for automotive vehicles and cooling systems. The cooling system model considers both the cooling of the stack and cooling of the compressed air through the intercooler. Theoretical analysis was carried out to calculate the heat dissipation requirements for the cooling system. The case study results show that more than 99.0% of heat dissipation requirement is for thermal management of the PEMFC stack; more than 98.5% of cooling water will be distributed to the stack cooling loop. It is also demonstrated that controlling cooling water flow rate and stack inlet cooling water temperature could effectively satisfy thermal management constraints. These thermal management constraints are differences in stack inlet and outlet cooling water temperature, stack temperature, fan power consumption, and pump power consumption.     

Techno-economic analysis of hydrogen energy for renewable energy power smoothing

With the increasing proportion of renewable energy (mainly wind power and photovoltaic) connected to the grid, the fluctuation of renewable energy power brings great challenges to the safe and reliable operation of power grid. As a clean, low-carbon secondary energy, hydrogen energy is applied in renewable energy (mainly wind power and photovoltaic) grid-connected power smoothing, which opens up a new way of coupling hydrogen storage energy with renewable energy. This paper focuses on the optimization of capacity of electrolyzers and fuel cells and the analysis of system economy in the process of power output smoothing of wind/photovoltaic coupled hydrogen energy grid-connected system. Based on the complementary characteristics of particle swarm optimization (PSO) and chemical reaction optimization algorithm (CROA), a particle swarm optimization-chemical reaction optimization algorithm (PSO-CROA) are proposed. Aiming at maximizing system profit, the capacity of electrolyzers and fuel cells are constrained by wind power fluctuation, and considering environmental benefits, government subsidies and time value of funds, the objective function and its constraints are established. According to the simulation analysis, by comparing the calculated results with PSO and CROA, it shows that PSO-CROA effectively evaluates the economy of the system, and optimizes the optimal capacity of the electrolyzers and fuel cells. The conclusion of this paper is of great significance for the application of hydrogen energy storage in the evaluation of power smoothness and economy of renewable energy grid connection and the calculation of economic allocation of hydrogen energy storage capacity.     

电商平台产品共同购买网络的影响因素研究

共同购买网络的推荐系统应用越加广泛，仅基于网络内生结构变量研究其共同购买链接的经济意义已有局限，故加入网络口碑这一外生变量，进行更全面的分析。采用了社会网络方法中指数随机图模型进行建模，主要围绕产品销售量、产品入度、差评率和评论数4个方面因素，探究其对共同购买网络中共同购买链接形成的影响。结果显示，销售量、产品入度和评论数对共同购买链接形成的影响呈正比关系，而差评率则会显著地降低产品共同购买的几率。该指数随机图构建出的共同购买网络为在线电商平台管理网络口碑和推荐系统优化设计提供有益参考。     

腔磁力系统中的诱导透明和快慢光传播

为了在腔磁力系统中实现可控的磁子诱导透明、磁力诱导透明以及快慢光传播,建立了一个混合腔磁力系统.该系统由一个含有YIG球的微波腔和在z方向对球施加一个均匀的偏置磁场组成,并用强泵浦场驱动磁子和弱探测场驱动微波腔.研究表明,通过调节腔与磁子之间的相互作用强度和微波腔与磁子的耗散比,可以增加磁子诱导透明(MIT)、磁力诱导透明(MMIT)的效果和提高快慢光传播的速度.该研究结果可为磁力诱导放大、量子光学操纵和量子信息存储以及灵敏光开关的研究提供参考.